I am having trouble setting up the ViewSonic PJD 6531w using CD v1.29 (v257.21)?

I am having trouble setting up the ViewSonic PJD 6531w using CD v1.29 (3D Vision driver version 257.21)?

---

The 3D Vision setup wizard is incorrectly setting the PJD6531w to an unsupported mode and will create user installation concerns.

Users can work around this using by running through the 3D Vision setup wizard and ignoring the warnings and lack of correct stereoscopic 3D functionality. After the Setup Wizard is completed and the user selects a supported 3D Vision resolution, the drivers will functions correctly.

Please follow these steps to work around this issue.

Figure 1

Figure 2

• Make sure to plug IR emitter when prompt to (a green light will appear when IR emitter is on)
• Click 'Next'

Figure 3

• Select the first box '(Recommended)'
• Click 'Next'

Figure 4

• 'Product name' should display instantly on screen (refer to text circled in yellow above)
• Click 'Next'

Figure 5

• A red error message will appear, ignore text message
• Follow Steps 1 and 2
• Click 'Next

Figure 6

• Select 'No' on 'Do you see flicker' option
• Click 'Next'

Figure 7

• For Step 1, stereo will not function correctly in text image (ignore this step)
• For Step 2, select green hexagon box for left eye and blue triangle box for right eye
• Click 'Next'

Figure 8

• For Step 1, stereo will not function correctly in the image box (ignore this step)
• For Step 2, select left box
• Click 'Next'

Figure 9

· Do not launch 3D slideshow

· Click 'Finish'

Figure 10

• In the NVIDIA control panel, select 'Test stereoscopic 3D' to change display settings

Figure 11

• Change resolution to 1280x720 and refresh rate to 120Hz
• Select 'Apply this refresh rate to all games'
• Click 'Apply'
• Click 'Close'

3D Vision will now work properly.